Application of adjusting screw rod
The adjusting screw is an important component in mechanical devices. Proper adjustment is necessary to ensure its normal operation and accuracy.
Publish Time:
2025-03-31
The adjusting screw is an important component in mechanical devices. To ensure its normal operation and accuracy, appropriate adjustments are necessary. For a screw with a length of 200mm, the adjustment steps are as follows: First, confirm that the screw is unloaded; then, use a special tool to loosen the fixing screws. Next, adjust the travel of the screw by adjusting the nut or shim to ensure its straightness and coaxiality. After adjustment, refasten and tighten the screws. To ensure the adjustment effect, multiple checks and fine-tuning are required. In addition, the screw should be kept clean and dry to avoid rust and excessive wear. In short, correct adjustment of the screw ensures its accuracy and service life, improving the operating efficiency of the mechanical device.
Related News
Corrosion protection of fasteners
Fasteners are the most common components in mechanical equipment, and their role is also crucial.
2025-03-31
How to choose screw materials?
Requirements for screw materials in terms of mechanical properties, especially strength. Some screws require higher strength.
2025-03-31
What are the principles for selecting stainless steel for fasteners?
After comprehensively and integrally considering these five aspects, the screw-coating editor finally determines the grade, variety, specification, and material standard of the fasteners.
2025-03-31
From a production perspective, anti-loosening screws can be divided into two major categories
Engineering plastics are attached to the screw thread surface using special engineering plastics and a special processing process.
2025-03-31
What are anti-loosening screws? What is their function?
Locknuts are screws that prevent loosening. Let's take a look at how locknuts achieve this effect.
2025-03-31
What are the methods for preventing fasteners from loosening?
Using mechanical fasteners to fix and tighten threaded parts to connected parts or threaded parts to threaded parts
2025-03-31